Ing. Jaroslav Čech Ph.D.

Influence of firing temperature and silver–aluminum paste intermixing on front contact quality and performance of TOPCon silicon solar cells

Year of publication

2026

Publication

Solar Energy Materials and Solar Cells. 2026, 296 1-11. ISSN 0927-0248.

Authors

Krejci, M. Hurni, J. Genç, E. Čech, J. Kuliček, J. Ukraincev, J. Haušild, P. Rezek, B. Haug, F.J.

Link

https://doi.org/10.1016/j.solmat.2025.114085

Effect of cold rolling strain on the microstructural evolution in equimolar MoNbTaTiZr refractory complex concentrated alloy: Comprehensive characterization

Year of publication

2026

Publication

Materials & Design. 2026, 261 1-21. ISSN 0264-1275.

Authors

Školáková, A. Katayama, H. Lejček, P. Molnárová, O. Tsurekawa, S. Veřtát, P. Duchoň, J. Čech, J. Svora, P. Ekrt, O. Pinc, J.

Link

https://doi.org/10.1016/j.matdes.2025.115393

Assessing the superelastic properties of SPS NiTi alloy by nanoindentation

Year of publication

2026

Publication

Materials Today Communications. 2026, 52 1-11. ISSN 2352-4928.

Authors

Raffort, T.P.R. Sulovský, M. Tesař, K. Kovářík, O. Heller, L. Čech, J.

Link

https://doi.org/10.1016/j.mtcomm.2026.114946

The role of the preparation route on microstructure and mechanical properties of AlCoCrFeNi high entropy alloy

Year of publication

2024

Publication

Journal of Materials Research and Technology. 2024, 30 4248-4260. ISSN 2238-7854.

Authors

Kratochvil, P. Prusa, F. Thurlova, H. Strakosova, A. Karlík, M. Čech, J. Haušild, P. Čapek, J.

Link

https://doi.org/10.1016/j.jmrt.2024.04.090

Microstructure and mechanical properties of in-situ SiO2-reinforced mechanically alloyed CoCrFeNiMnX (X==5, 20, 35 at.%) high-entropy alloys

Year of publication

2024

Publication

Journal of Materials Research and Technology. 2024, 32 860-873. ISSN 2238-7854.

Authors

Prusa, F. Kratochvil, P. Strakosova, A. Karlík, M. Čech, J. Haušild, P. Čapek, J.

Link

https://doi.org/10.1016/j.jmrt.2024.07.172

Dispersion of stable quasicrystal phase by precipitation during extrusion in a Mg-Zn-Al alloy: Microstructure and mechanical properties

Year of publication

2024

Publication

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 2024, 891 ISSN 0921-5093.

Authors

Singh, A. Somekawa, H. Hiroto, T. Ode, M. Tesař, K. Čech, J. Hara, T.

Link

https://doi.org/10.1016/j.msea.2023.145979

Correlative atomic force microscopy and scanning electron microscopy of bacteria-diamond-metal nanocomposites

Year of publication

2024

Publication

Ultramicroscopy. 2024, 258 ISSN 0304-3991.

Authors

Rutherford, D. Kolarova, K. Čech, J. Haušild, P. Kuliček, J. Ukraintsev, E. Stehlik, S. Dao, R. Neuman, J. Rezek, B.

Link

https://doi.org/10.1016/j.ultramic.2023.113909

Enhanced antimicrobial and photocatalytic effects of plasma-treated gallium-doped zinc oxide

Year of publication

2024

Publication

Applied Surface Science. 2024, 655 1-14. ISSN 0169-4332.

Authors

Rutherford, D. Remes, Z. Kolarova, K. Matolinova, I. Čech, J. Micova, J. Rezek, B.

Link

https://doi.org/10.1016/j.apsusc.2024.159567

Annealing of Cu nanolayers on glass: Structural, mechanical and thermodynamic analysis

Year of publication

2023

Publication

Vacuum. 2023, 212 ISSN 0042-207X.

Authors

Lacmanova, V. Leitner, J. Haušild, P. Čech, J. Nohava, J. Sajdl, P. Michalcova, A. Slepicka, P. Reznickova, A.

Link

https://doi.org/10.1016/j.vacuum.2023.111991

Texture, elastic anisotropy and thermal stability of commercially pure titanium prepared by room temperature ECAP

Year of publication

2023

Publication

Materials & Design. 2023, 226 ISSN 0264-1275.

Authors

Tesař, K. Koller, M. Vokoun, D. Tyc, O. Čech, J. Sedlák, P.

Link

https://doi.org/10.1016/j.matdes.2023.111678

Microstructure and Mechanical Properties of Spark Plasma Sintered CoCrFeNiNbX High-Entropy Alloys with Si Addition

Year of publication

2023

Publication

Materials. 2023, 16(6), ISSN 1996-1944.

Authors

Karlík, M. Prusa, F. Kratochvil, P. Thurlova, H. Čech, J. Čapek, J.

Link

https://doi.org/10.3390/ma16062491

Indentation Size Effect in Electrodeposited Nickel with Different Grain Size and Crystal Orientation

Year of publication

2023

Publication

Crystals. 2023, 13(9), ISSN 2073-4352.

Authors

Haušild, P. Čech, J. Karlík, M. Legros, M.

Link

https://doi.org/10.3390/cryst13091385

Tungsten Heavy Alloys from Mixed Feedstock by RF Plasma

Year of publication

2023

Publication

Journal of Thermal Spray Technology. 2023, 32 ISSN 1544-1016.

Authors

Kovářík, O. Čížek, J. Klečka, J. Karlík, M. Čech, J. Kozlík, J. Lauschmann, H.

Link

https://doi.org/10.1007/s11666-023-01647-6

Mechanically Alloyed High-entropy Alloys Compacted by Spark Plasma Sintering

Year of publication

2023

Publication

Microscopy and Microanalysis. 2023, 29(1), 1533-1534. ISSN 1431-9276.

Authors

Průša, F. Kratochvíl, P. Thürlová, H. Karlík, M. Čech, J. Haušild, P.

Link

https://doi.org/10.1093/micmic/ozad067.789

Mechanical and fatigue properties of plasma sprayed (Fe0.9Co0.1)76Mo4(P0.45C0.2B0.2Si0.15)20 and Fe56.04Co13.45Nb5.5B25 metallic glasses

Year of publication

2023

Publication

Surface and Coatings Technology. 2023, 459 ISSN 0257-8972.

Authors

Małachowska, A. Kovářík, O. Sajbura, A. Sokolowski, P. Lindner, T. Scholze, M. Karlík, M. Čech, J. Lampke, T.

Link

https://doi.org/10.1016/j.surfcoat.2023.129361

Preparation of HfNbTiTaZr Thin Films by Ionized Jet Deposition Method

Year of publication

2023

Publication

Crystals. 2023, 13(4), ISSN 2073-4352.

Authors

Skočdopole, J. Čech, J. Čapek, J. Trojan, K. Kalvoda, L.

Link

https://doi.org/10.3390/cryst13040580

Interface-Driven Strain in Heavy Ion-Irradiated Zr/Nb Nanoscale Metallic Multilayers: Validation of Distortion Modeling via Local Strain Mapping

Year of publication

2022

Publication

ACS Applied Materials & Interfaces. 2022, 14(10), 12777-12796. ISSN 1944-8244.

Authors

Sen, H. Daghbouj, N. Callisti, M. Vronka, M. Karlík, M. Duchoň, J. Čech, J. Lorinčík, J. Havránek, V. Bábor, P. Polcar, T.

Link

https://doi.org/10.1021/acsami.1c22995

Cohesion of Dissimilar Splats in Hybrid Plasma-Sprayed Coatings: A Case Study for Al2O3-TiO2

Year of publication

2022

Publication

Journal of Thermal Spray Technology. 2022, 31(6), 1869-1888. ISSN 1059-9630.

Authors

Musalek, R. Tesar, T. Dudík, J. Medricky, J. Čech, J. Lukac, F.

Link

https://doi.org/10.1007/s11666-022-01401-4

Microstructure and Mechanical Properties of Laser Additive Manufactured H13 Tool Steel

Year of publication

2022

Publication

Metals — Open Access Metallurgy Journal. 2022, 12(2), ISSN 2075-4701.

Authors

Trojan, K. Ocelík, V. Čapek, J. Čech, J. Canelo-Yubero, D. Ganev, N. Kolařík, K. De Hosson, J.T.M.

Link

https://doi.org/10.3390/met12020243

Revealing nanoscale strain mechanisms in ion-irradiated multilayers

Year of publication

2022

Publication

Acta materialia. 2022, 229 ISSN 1359-6454.

Authors

Daghbouj, N. Sen, H. Callisti, M. Vronka, M. Karlík, M. Duchon, J. Čech, J. Havranek, V. Polcar, T.

Link

https://doi.org/10.1016/j.actamat.2022.117807

Mechanical and Fatigue Properties of Diamond-Reinforced Cu and Al Metal Matrix Composites Prepared by Cold Spray

Year of publication

2022

Publication

Journal of Thermal Spray Technology. 2022, 31(1-2), 217-233. ISSN 1059-9630.

Authors

Kovářík, O. Čížek, J. Shuo, J. Lupoi, R. Janovská, M. Čapek, J. Čech, J. Siegl, J. Chráska, T.

Link

https://doi.org/10.1007/s11666-022-01321-3

Characterizing heavy ions-irradiated Zr/Nb: Structure and mechanical properties

Year of publication

2022

Publication

Materials & Design. 2022, 219 ISSN 0264-1275.

Authors

Daghbouj, N. Sen, H. Cizek, J. Lorincik, J. Karlík, M. Callisti, M. Čech, J. Havránek, V. LI, B. Krsjak, V. Liedke, M.O. Butterling, M. Wagner, A. Polcar, T.

Link

https://doi.org/10.1016/j.matdes.2022.110732

Plastic instabilities explored via acoustic emission during spherical nanoindentation

Year of publication

2022

Publication

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING. 2022, 841 ISSN 0921-5093.

Authors

Ctvrtlik, R. Čech, J. Tomastik, J. Vaclavek, L. Haušild, P.

Link

https://doi.org/10.1016/j.msea.2022.143019

Indenter wear study and proposal of a simple method for evaluation of indenter blunting

Year of publication

2021

Publication

Journal of Materials Research. 2021, 36 4449-4459. ISSN 0884-2914.

Authors

Nohava, J. Čech, J. Havlíček, M. Consiglio, R.

Link

https://doi.org/10.1557/s43578-021-00401-4